Energy Regulations

NFPA 70E Changes: Now Everyone can Benefit from the Tables

Last month at the annual NFPA meeting in Boston, NFPA 70E passed one of the final milestones on the road to completion and it is expected to be issued later… Read more »

Leave a comment

Gradually Raising the Safety Levels of Existing Residential Buildings

This is the final post of a three-part series addressing electrical safety non-compliance in older residential dwellings. In the first two posts, we looked at the high number of risks… Read more »

Leave a comment

How Today’s Electrical Standards can help Improve Safety in Existing Dwellings

This is the second of three posts focusing on addressing electrical safety non-compliance in many older residential dwellings. In the first post, we looked at the risks and documented incidents… Read more »

Leave a comment

Powering the New Energy World

Today’s energy world is facing widespread transformation. The electricity and Oil & Gas sectors are taking note. Traditional, centralized electric grid models are evolving to a world of distributed energy… Read more »

2 Comments

Making Semiconductor Production More Energy Efficient

In my last blog, I wrote about how protecting critical electrical supplies in semiconductor fabrication plants is vital to ensure continuous manufacturing operations . Quality chip manufacturing depends on a… Read more »

Leave a comment

What’s Inside Counts, Environmentally Speaking

Being environmentally responsible in manufacturing can be interpreted in more than one way. On one hand, a manufacturer can claim to be “green” because its products and operations meet all… Read more »

4 Comments

The Risk Assessment: An Electrical Contractor’s Most Important Tool

Are you a risk taker?  Does it depend on the situation?  Does it depend on the consequences?  Can’t answer the question without knowing more information?  Congratulations, you’re well on your… Read more »

1 Comment

Designing and Building an Electrical Panel Part 1: Protecting Equipment from its Environment

The most critical element that shapes a panel design project must be addressed at the very beginning of a project: where is the completed unit going to be installed? This… Read more »

Leave a comment

12 Things You Need to Know NOW About the 2017 NEC Code Changes

Worker Safety and new technology is of rising importance in the new edition of NFPA 70. The 2017 National Electrical Code (NEC) introduces this into one of the more significant… Read more »

Leave a comment

When Going Green, Consider Contactors

CO2 may be invisible but its impact isn’t. Countries around the world have signed up to cut emissions of it and other greenhouse gases by nearly a third within 10… Read more »

Leave a comment

IEC 60898-1 and IEC 60947-2: a tale of two standards

In response to the question “What’s the difference between standards IEC 60898-1 and IEC 60947-2?”, I’m tending to answer with another question: What do they have in common?  They are… Read more »

56 Comments

Why is a regulation required for developing Shore Side Electricity and greener ports?

In comparison to other economic sectors, there are few regulations tackling shipping and port industry emissions. In developed nations, air quality has improved substantially during the last several decades, despite… Read more »

Leave a comment

Finally, an opportunity to clean up global ports and make them more profitable

Adventures in the high seas are awe-inspiring. Uncontrollable natural forces, exciting discoveries, and great obstacles created by winds and beasts make for attention-grabbing tales. But, in the real-world, too much… Read more »

1 Comment

Portside emissions: a real health hazard

Who is most affected by emissions from ships? People living in and around port and harbour areas are growing increasingly concerned over air pollution in their communities. They have good… Read more »

2 Comments

New Survey Indicates Energy Efficiency Investments Are On the Rise but More Work to Be Done

The state of the United States’ economy over the past few years has been met with a significant focus on cost control in both the public and private sectors. At… Read more »

1 Comment

Standardization and Certification: Indissociable but different

As a member of the conformity assessment community, I get asked: what’s the difference between conformity assessment, standardization and certification? Actually, they’re different things. Broadly speaking, I’d say this. Certification is part… Read more »

4 Comments

Ready When You Are: Proper Equipment Storage

Data centers are continually pushed for shorter construction and installation periods to meet the growing consumer demand. Working with quick turn-around times during data center builds requires the on-demand availability… Read more »

3 Comments

Why do you need to comply with ISO50001?

The International Standards Organization is probably most famous for ISO9001, which defines Industrial Quality Management standards, and ISO14001, which is central to Environmental Management Systems. Sure, you can build a… Read more »

12 Comments

Top 5 Reasons Why ESCOs Have Failed to Realize the Full Potential of Energy Efficiency – Part I

Pick up an energy efficiency conference brochure and chances are there will be a dedicated session on Energy Service Companies (ESCOs). Talk to a top-level policy maker in any country… Read more »

2 Comments

One Thing is Clear: Transparency is Critical in Energy Consulting

Schneider Electric recently co-sponsored The Naked Company, a panel discussion and roundtables hosted in London by The Crowd, a catalyst for crowdsourcing the collective intelligence of corporate leaders. Before anyone… Read more »

Leave a comment

IEC 60898-1 and IEC 60947-2: a tale of two standards

In response to the question “What’s the difference between standards IEC 60898-1 and IEC 60947-2?”, I’m tending to answer with another question: What do they have in common?  They are… Read more »

56 Comments

Why do you need to comply with ISO50001?

The International Standards Organization is probably most famous for ISO9001, which defines Industrial Quality Management standards, and ISO14001, which is central to Environmental Management Systems. Sure, you can build a… Read more »

12 Comments

Goodbye UL 508: A Transition More Than a Decade in the Making

When it comes to standards that control panel builders have to abide by, I have an interesting view. On the one hand, I represent Schneider Electric on various standards committees… Read more »

9 Comments

What our future energy leaders are saying about 2050

Last week the Norwegian University of Science and Technology hosted the biennial International Summit Energy Summit (ISES) in Trondhiem, Norway which attracted 400 students from 64 countries.  This event is… Read more »

9 Comments

Follow this formula for an easy residential solar installation

Adding solar to your house is not the easiest home improvement project. You cannot simply nail solar modules to your roof and wait for the sun to power up your… Read more »

7 Comments

What is the Square Footage per Accredited Professional for your Green Building Rating System?

In this three part series, the Energy Efficiency Influence Team at Schneider Electric India will discuss possible bottlenecks impacting the growth of the green building market in India. In the… Read more »

7 Comments

Ports: How does Shore Power cut emissions and boost business?

By how much does shore power cut pollution? With high-voltage shore connection technology you power berthed ships from the local electricity grid and not from generators. And with their engines… Read more »

6 Comments

CIRED 2015 Highlights: European DSO Flexibility

CIRED, of course, is arguably the most important technical conference for those who work in and around the European electrical utility industry. If you missed it, allow me to fill… Read more »

6 Comments

Energy Efficiency as the First Fuel for an Emerging Economy?

In the discourse around energy and climate, it is often said that energy efficiency is the cheapest, cleanest and most abundant source of energy. The premise being: Energy is not… Read more »

6 Comments

7 Tips for Achieving ISO 50001 Compliance

You have likely heard of ISO 50001 already, but may have dismissed it as yet another standard that can be ignored until it fades away. Well, this one seems to… Read more »

5 Comments